-
Product Overview
-
Carrier 30XA liquid chillers are the premium solution for industrial and commercial applications where installers, consultants and building owners require optimum performance and maximum quality.
Features & Benefits
-
- Twenty-four sizes with nominal cooling capacities from 267 to 1682 kW.
- The ideal solution for industrial and commercial applications with optimal performances and maximum quality. Units designed to operate up to 55°C.
- Exceptional full load and part load energy efficiency: Eurovent energy efficiency class A and B (unit with high-efficiency option 119); standardised Eurovent values in accordance with EN 14511-3: 2013.
- Available in two versions: one with very low noise levels and superior energy efficiency; the other with optimal energy efficiency to minimise operating costs.
- Twin-rotor screw compressors with high-efficiency motor and a variable capacity valve for exact matching of the cooling capacity to the load.
- All-aluminium condenser (MCHE) with high-efficiency microchannels and high corrosion resistance.
- Use of R-134a refrigerant with zero ozone depletion potential – the microchannel heat exchangers reduce the refrigerant charge by 30%.
- Low-noise 4th generation Flying Bird fans made of composite material.
- Pro-Dialog+ control system.
- Flooded shell-and-tube evaporator.
- Economizer system with electronic expansion device to increase cooling capacity.
- V-shape condenser coils allow quieter air flow across the coil.
- Simplified electrical connections.
- Units are run-tested before shipment and include a quick-test function for fast
- Leak-tight refrigerant circuit.
- Comprehensive endurance tests.
- Aquaforce offers multiple remote control, monitoring and diagnostic possibilities.
Options & Accessories
- MCHE coils corrosion protections
- Cu/Al coils corrosion protections
- Low/very low temperature glycol solution
- Unit equipped for discharge ducting
- IP54 control box
- Tropical applications
- Grilles and enclosure panels
- Winter operation
- Evaporator and hydronic module frost protection
- Heat reclaim
- Single power connection point
- Service/discharge valve
- Evaporator with one pass more or less
- 21 bar evaporator
- Reversed water connections
- Low or high-pressure, single or dual-pump hydronic module
- Direct-expansion free-cooling system
- High energy efficiency version
- JBus, ModBus, BacNet/LON gateways
- Energy Management module EMM
- Pro-Dialog Touch Screen
- Dual safety valve installed with three-way valve
- Built to Swiss, Russian, Australian codes
- Traditional coils
- Insulation on evaporator entering/ leaving refrigerant lines
- Low and very low sound level
- Master/slave operation
- Compressor enclosure
- Welded Victaulic evaporator water connections
- Evaporator with aluminium jacket